Kuhlman

Proline Pro-Finish, Ready-To-Use, 5-Gallon Container

Tue, 30 Nov -001 00:00:00 -0456

]]>Proline high-performance finishing aid for freshly poured concrete. Lubricates the surface during the floating and troweling stages for a better, faster finish. Pro-Finish TDC slows down the surface drying and eliminates the need for water during finishing. Increases surface compressive strength, reduces efflorescence, and minimizes checking , scaling ,and surface cracking.

• 5 gallon container
• Coverage for Finishing aid 500 - 1000 SF/GAL
• Coverage for Performace Concrete 250 - 500 SF/GAL
• Apply with a low-pressure sprayer

" border="0"> ]]>" border="0">

Proline Pro-Finish, Ready-To-Use, 1-Gallon Container

Tue, 30 Nov -001 00:00:00 -0456

]]>Proline high-performance finishing aid for freshly poured concrete. Lubricates the surface during the floating and troweling stages for a better, faster finish. Pro-Finish TDC slows down the surface drying and eliminates the need for water during finishing. Increases surface compressive strength, reduces efflorescence, and minimizes checking , scaling ,and surface cracking.

• 1 gallon container
• Coverage for Finishing aid 500 - 1000 SF/GAL
• Coverage for Performace Concrete 250 - 500 SF/GAL
• Apply with a low-pressure sprayer

" border="0"> ]]>" border="0">

Bon Tools Double Time Fresno Brush, 48" x 5"

Tue, 30 Nov -001 00:00:00 -0456

]]>This Bon Tools Double Time Fresno Brush features;

• Combination fresno brush allows for fine pressure adjustments for aconsistent, uniform finish
• A simple turn of the Rock N Roll bracket allows the fresno to be used independently
• Sold complete with Rock N Roll bracket, coarse bristle brush and fresno
• Replacement coarse poly bristle brushes are sold separately
• Handle sold separately
" border="0"> ]]>" border="0">

Detectable Warnings, 2' x 4' Cast-In-Place AlertCast ADA Mat, in Colonial Red Color

Tue, 30 Nov -001 00:00:00 -0456

]]>AlertCast is a glass reinforced thermoset composite engineered for superior impact resistance, slip resistance, wear resistance and long-term durability. Our exclusive design incorporates a top panel of truncated domes molded to exact ADA specifications for detectable warnings and bottom docking anchors that are embedded into wet concrete. The special concrete anchors lock the part securely into the concrete without trapping air beneath the part 146;s surface. While incredibly strong, this system is actually very lightweight and easy to work with during installation.

• 2' x 4'
• Colonial Red Color
• Replaceable, uses patented PENETRATOR anchoring system
• Premium UV Treatment
• Superior strength and impact resistance
• All weather performance
• Delivered ready to install
" border="0"> ]]>" border="0">

SpecChem Bio Strip WB, Form Release Agent, 5-Gallon Container

Tue, 30 Nov -001 00:00:00 -0456

]]>Bio Strip WB is a revolutionary, 100-percent natural organic, chemically reactive release agent. This product is fully biodegradable, making it the perfect choice for environmentally sensitive projects like bridge formwork over rivers or potable water reservoirs. Bio Strip WB ensures easy concrete release, leaving behind a bondable concrete surface ready for architectural applications.

• 5 Gallon container
• Completely organic and biodegradable.
• Free from petroleum distillates, making it environmentally friendly.
• VOC compliant and odorless for safer use.
• Ready-to-use without the need for dilution.
• Chemically reactive yet non-staining to preserve the integrity of your forms and concrete.
" border="0"> ]]>" border="0">

Durajoint Large Splicing Iron, 4-1/2" x 14"

Tue, 30 Nov -001 00:00:00 -0456

]]>Durajoint Large Splicing Iron.

• 4-1/2" x 14" with 1 Teflon Cover
• Thermostat
• 110V, 600 Watts
" border="0"> ]]>" border="0">

Durajoint Small Splicing Iron, 2" x 14"

Tue, 30 Nov -001 00:00:00 -0456

]]>Durajoint Small Splicing Iron.

• 2" x 14" with 1 Teflon Cover
• Thermostat
• UL Listed 110V, 600 Watts
" border="0"> ]]>" border="0">

Ball Curb Stop, CC x PJ CTS, 1-1/2" AYM

Tue, 30 Nov -001 00:00:00 -0456

]]>Ball curb stop

• 1-1/2 inch
• CC x PJ
" border="0"> ]]>" border="0">

CTS x PJ Ball Curb Valve, 1" AYM

Tue, 30 Nov -001 00:00:00 -0456

]]>Ball curb valve

• 1-inch
• CTS x PJ
" border="0"> ]]>" border="0">

Pack Joint Tee for CTS to Pack Joint, 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Pack Joint Tee for CTS to Pack Joint

• 2-inch
" border="0"> ]]>" border="0">

Quick Joint EII Coupling, 90-Degree Bend, 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Quick Joint EII Coupling for copper or plastic

• 2-inch
• CTS
• 90-degree bend
" border="0"> ]]>" border="0">

Ballcorp Corporation Stop, Taper Thread Inlet, 2" CC x QJ

Tue, 30 Nov -001 00:00:00 -0456

]]>Ballcorp Corporation Stop, Taper Thread Inlet.

• 2-inch CC x QJ
" border="0"> ]]>" border="0">

Pack Joint for Copper or Plastic Tubing CTS by Pack Joint for Iron Pipe, 1"

Tue, 30 Nov -001 00:00:00 -0456

]]>Pack Joint for Copper or Plastic Tubing CTS by Pack Joint for Iron Pipe.

• 1-inch
" border="0"> ]]>" border="0">

Pack Joint Coupling for Copper or Plastic CTS by Pack Joint for Iron Pipe, 1" x 3/4"

Tue, 30 Nov -001 00:00:00 -0456

]]>Pack Joint Coupling for Copper or Plastic CTS by Pack Joint for Iron Pipe

• 1-inch x 3/4-inch
" border="0"> ]]>" border="0">

Quick Joint Coupling for Copper or Plastic Tubing, by Pack Joint for Iron Pipe, 3/4" x 1"

Tue, 30 Nov -001 00:00:00 -0456

]]>Quick Joint Coupling for Copper or Plastic Tubing, by Pack Joint for Iron Pipe.

• 3/4-inch x 1-inch
• CTS
" border="0"> ]]>" border="0">

Quick Joint Coupling for Copper or Plastic Tubing, 3/4"

Tue, 30 Nov -001 00:00:00 -0456

]]>Quick Joint Coupling for Copper or Plastic Tubing.

• 3/4-inch
• CTS
" border="0"> ]]>" border="0">

Quick Joint Coupling for Copper or Plastic Tubing, 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Quick Joint Coupling for Copper or Plastic Tubing.

• 2-inch
• CTS
" border="0"> ]]>" border="0">

Brass Bushing for Corporation Stop Inlets, 2" x 1-1/2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Brass Bushing for Corporation Stop Inlets

• 2-inch x 1-1/2 inch
• Male AWWA taper by Female AWWA Taper inside thread
" border="0"> ]]>" border="0">

Ball Valve Curb Stop, Pack Joint 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Ball Valve Curb Stop, Pack Joint for copper or plastic tubing

• 2-inch
• CTS
" border="0"> ]]>" border="0">

Iron Yoke Bar, 5/8" x 3/4"

Tue, 30 Nov -001 00:00:00 -0456

]]>Iron Yoke Bar

• 5/8-inch x 3/4-inch
" border="0"> ]]>" border="0">

Ball Valve Curb Stop, 1" FIP x FIP Lockwing

Tue, 30 Nov -001 00:00:00 -0456

]]>Ball Valve Curb Stop

• 1-inch FIP x FIP Lockwing
" border="0"> ]]>" border="0">

Brass Bushing for Corporation Stop Inlet, 1" x 3/4" AWWA

Tue, 30 Nov -001 00:00:00 -0456

]]>Brass Bushing for Corporation Stop Inlet

• 1-inch x 3/4-inch AWWA
" border="0"> ]]>" border="0">

Ball Valve Curb Stop, Quick Joint for Copper or Plastic Tubing, 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Ball valve curb stop

• 2-inch
• Conforms to AWWA Standard C800 (ASTM B584, UNS C89833)
• The product has the letters "NL" cast into the main body for lead-free identification
• Certified to NSF/ANSI/CAN Standard 61 and NSF/ANSI/CAN Standard 372 where applicable
• Brass components that do not come in contact with potable water conform to AWWA
Standard C800 (ASTM B62 and ASTM B584, UNS C83600, 85-5-5-5)
• Valve is non-directional and is watertight with flow in either direction
• Ends are integral or secured with adhesive to prevent unintentional disassembly
• Hole for attaching curb box
" border="0"> ]]>" border="0">

4D Hard-Cut Masonry Nails, 1-1/2" Long, 50-Pound Pack

Tue, 30 Nov -001 00:00:00 -0456

]]>These 4D hard-cut masonry nails are used for attaching wood to cinder blocks, mortar joints, brick walls, and fresh concrete. Blunt point and tapered shank reduces splitting.

• Made from steel for strength and durability
• 1-1/2 inch long
• 50-pound pack

" border="0"> ]]>" border="0">

Tolloti Pipe Increaser / Reducer, Schedule 40, 4" x 2" H x H

Tue, 30 Nov -001 00:00:00 -0456

]]>Coupling Fitting Connector

• 4-inch x 2-inch Nominal
• Hub End Style
• Molded Method of Manufacture
• DWV, PVC,
• White
• Domestic
" border="0"> ]]>" border="0">

Trumbull Low Carbon Steel, Bent Eye Bolt, 3/4"

Tue, 30 Nov -001 00:00:00 -0456

]]>For 4" through 12" Mechanical Joints. Used in place of T-Head Bolt. 3/4" threaded rod passes through eye and is retained with heavy hex nut, sold separately.

• 3/4-inch
• Made of low carbon steel
" border="0"> ]]>" border="0">

Mueller Meter Yoke 5/8" x 3/4" x 15"

Tue, 30 Nov -001 00:00:00 -0456

]]>Copper meter yoke with horizontal inlet and outlet.

• 5/8" x 3/4" x 15"
• B-2470-6AN
" border="0"> ]]>" border="0">

Mueller Straight Meter Coupling, 5/8" x 1/2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Straight meter coupling

• 5/8-inch x 1/2-inch
• MIP x meter swivel nut Machined inside and outside - nut drilled for wire seal
" border="0"> ]]>" border="0">

Macomb Jomar Lead Free Brass Locking Lever Handle, Threaded Brass Ball Valve, 1-1/2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Jo-Flo 2-Piece Full-Port Ball Valve, Series/Model: Model JF-100TG-LH, Nominal Size: 2-1/2 IN, Connection Type: FNPT, Pressure Rating: 600 PSI (WOG), 150 PSI (SWP), Brass Body Material, Locking Lever Handle Operator Type, Handle Material: Steel, Stem Material: 304 Stainless Steel, Trim Material: 304 Stainless Steel Ball, Packing Material: PTFE, Brass Gland, Seat Material: PTFE, Material Specification: Body And Gland: UNS C46400, Finish/Color: Chrome Plated Handle, Industry Standards: NSF 61-8, NSF 372, IAPMO, CUPC Certified, 5.59 IN Width, Lead Free: Yes, Other Physical Dimension: 4.88 IN Inlet Center To Top Of Handle, 7.35 IN Handle Length

" border="0"> ]]>" border="0">

Tyler Union MJ Solid Sleeve, 16" Long C-153 Less Accessories

Tue, 30 Nov -001 00:00:00 -0456

]]>Mechanical joint solid sleeve

• 16-inch Nominal
• 0.57 in Thickness
• 15-inch Length
• Ductile Iron, Domestic
" border="0"> ]]>" border="0">

Macomb Close Brass Nipple, Domestic LF, 2" x 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Close brass nipple.

• Domestic LF
• 2-inch x 2-inch
• Material Standard: ASTM B43
• Connection Type: MNPT, STD/SCH 40 Schedule
" border="0"> ]]>" border="0">

Mueller BR2B Series Service Saddle Double Brass Strap, 12" x 1"

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller BR2B Series Service Saddles Double Straps.

• 12-inch x 1-inch
• Outlet tapped with either AWWA taper (C.C.) or AWWA I.P. thread (F.I.P.T.)
• For use on cast iron or ductile iron pipe, and cast iron O.D. pipe (BR2B only)
• 200 psig (1380 kPa/13.80) maximum working pressure
• Brass body
• Flattened silicon bronze straps
• Rolled strap threads
• O-ring sealed outlet
• Meets all applicable parts of ANSI/AWWA C800
• NSF 61 Certified
" border="0"> ]]>" border="0">

ADS N-12 Single Wall Cap, 12" Diameter

Tue, 30 Nov -001 00:00:00 -0456

]]>End caps and end plugs create a termination point for a line of drainage pipe.

• 12-inch
" border="0"> ]]>" border="0">

ADS 12" N-12, Injection Molded, 45-Degree Bend

Tue, 30 Nov -001 00:00:00 -0456

]]>N-12 dual wall injection molded and fabricated bends to service most stormwater management projects.

• 12-inch
• 45-degree bend
" border="0"> ]]>" border="0">

ADS N-12 Dual Wall Standard Tee, 12"

Tue, 30 Nov -001 00:00:00 -0456

]]>The N-12 dual wall injection molded and hand fabricated tees join three pieces of N-12 dual wall pipe together are available in soil tight (ST) and water tight (WT). N-12 dual wall tees are readily available to service most stormwater management projects.

• 12-inch
" border="0"> ]]>" border="0">

Baughman Tile 6" End Cap for Single Wall Pipe

Tue, 30 Nov -001 00:00:00 -0456

]]>This Baughman Tile single wall end cap

• 6" diameter
• Single wall
" border="0"> ]]>" border="0">

Baughman Tile Corrugated Reducing Tee, Single Wall, 6" x 4"

Tue, 30 Nov -001 00:00:00 -0456

]]>This Baughman Tile single wall reducing corrugated tee.

• 6" x 4" diameter
• Single wall

" border="0"> ]]>" border="0">

Techo-Bloc Blu 60 Slab Paver in Champlain Grey Color with Slate Texture, Sold by the Row of 10.62 Square Feet

Tue, 30 Nov -001 00:00:00 -0456

]]>You can hear the echo of the craftsman's tools in Blu, with its opulent colors and modern look. Blu 60mm is a great choice for pedestrian and light-traffic areas such as walkways and patios.

• Colored though the whole paver
• Lifetime transferable warranty
• No discoloration over time
• Offered in up to seven different colors
• Offered in three different textures to create contrast
• Resistant to de-icing salts
• Sold in rows of 10.62 sq. ft.
• 116.82 sq. ft. per pallet
• 11 rows per pallet with three sizes:
a) 44 units: 2-3/8 in. high x 13 in. wide x 6-1/2 in. long
b) 44 units: 2-3/8 in. high x 13 in. wide x 13 in. long
c) 22 units: 2-3/8 in. high x 13 in. wide x 19-1/2 in. long
• 3,175 pounds per pallet

" border="0"> ]]>" border="0">

Western Forms Double End Rod Support, Sold by the Box of 250

Tue, 30 Nov -001 00:00:00 -0456

]]>Western Forms double end rod supports.

• Box of 250
" border="0"> ]]>" border="0">

Plylag Bolt, 1/2" Diameter x 9-3/4" Long with W/7 Thread

Tue, 30 Nov -001 00:00:00 -0456

]]>Plylags are used externally on modular forms to attach wales/strongbacks or internally to attach coil ties, rock anchors.

• 1/2-inch diameter x 9-3/4-inch long
• W/7 Thread
" border="0"> ]]>" border="0">

Plylag Bolt, 1/2" Diameter x 6-3/4" Long with W/4 Thread

Tue, 30 Nov -001 00:00:00 -0456

]]>Plylags are used externally on modular forms to attach wales/strongbacks or internally to attach coil ties, rock anchors.

• 1/2-inch diameter x 6-3/4-inch long
• W/4 Thread
" border="0"> ]]>" border="0">

Macomb Jomar Lead Free Brass Locking Lever Handle, Threaded Brass Ball Valve, 2"

Tue, 30 Nov -001 00:00:00 -0456

]]>Jo-Flo 2-Piece Full-Port Ball Valve, Series/Model: Model JF-100TG-LH, Nominal Size: 2 IN, Connection Type: FNPT, Pressure Rating: 600 PSI (WOG), 150 PSI (SWP), Brass Body Material, Locking Lever Handle Operator Type, Handle Material: Steel, Stem Material: 304 Stainless Steel, Trim Material: 304 Stainless Steel Ball, Packing Material: PTFE, Brass Gland, Seat Material: PTFE, Material Specification: Body And Gland: UNS C46400, Finish/Color: Chrome Plated Handle, Industry Standards: C/US UL Listed, C/US CSA Certified, FM Approved, NSF 61-8, NSF 372, IAPMO, CUPC Certified, 4.29 IN Width, Lead Free: Yes, Other Physical Dimension: 3.97 IN Inlet Center To Top Of Handle, 5.59 IN Handle Length
" border="0"> ]]>" border="0">

Macomb Jomar Lead Free Brass Locking Lever Handle, Threaded Brass Ball Valve, 1"

Tue, 30 Nov -001 00:00:00 -0456

]]>Jo-Flo 2-Piece Full-Port Ball Valve, Series/Model: Model JF-100TG-LH, Nominal Size: 1 IN, Connection Type: FNPT, Pressure Rating: 600 PSI (WOG), 150 PSI (SWP), Brass Body Material, Locking Lever Handle Operator Type, Handle Material: Steel, Stem Material: 304 Stainless Steel, Trim Material: 304 Stainless Steel Ball, Packing Material: PTFE, Brass Gland, Seat Material: PTFE, Material Specification: Body And Gland: UNS C46400, Finish/Color: Chrome Plated Handle, Industry Standards: C/US UL Listed, C/US CSA Certified, FM Approved, NSF 61-8, NSF 372, IAPMO, CUPC Certified, 2.97 IN Width, Lead Free: Yes, Other Physical Dimension: 3.22 IN Inlet Center To Top Of Handle, 4.86 IN Handle Length
" border="0"> ]]>" border="0">

Mueller EZ-Tap Drilling Machine Kit for 3/4" and 1" Taps

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller Drilling Machine EZ-TAP Drilling Machine. This compact, lightweight EZ-TAP drilling machine is designed specifically for water taps and primarily used with service saddles and
corporation stops. It is now easier to make service connections on mains with or without pressure.

• Used for 3/4" and 1" Taps
" border="0"> ]]>" border="0">

Mueller Shell Cutter,1-7/16", PVC Pipe 1-1/2" Service D-5

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller Shell Cutter for D-5 Machine.
" border="0"> ]]>" border="0">

Mueller Shell Cutter Holder for 528087 and 528088, D-5 Cutters

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller Shell Cutter holder for D-5 Machine.

• For 528087 and 528088
" border="0"> ]]>" border="0">

Mueller Shell Cutter Holder for 681919 and 681920, D-5 Cutters

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller Shell Cutter holder for D-5 Machine.

• For 681919 and 681920
" border="0"> ]]>" border="0">

Mueller Machine Adapter Nipple Gasket, 3/4"

Tue, 30 Nov -001 00:00:00 -0456

]]>Several types of machine adapter nipples require a gasket to seal the adapter
to the outlet of the corporation stop.

• 3/4"
" border="0"> ]]>" border="0">

Mueller Drill Holder for 36069 Drill D-5 Machine

Tue, 30 Nov -001 00:00:00 -0456

]]>Mueller Drill holder for D-5 Machine.

• For 36069
" border="0"> ]]>" border="0">

HTC Professional S-Series Floor Grinding Segments, EZ S5 Black (DS) 150 Grit, for Soft Concrete or Asphalt

Tue, 30 Nov -001 00:00:00 -0456

]]>These HTC Professional S-Series floor-grinding segments are specifically developed for grinding soft concrete and abrasive surfaces (Mohs scratch test between 2 and 3).

For use with soft concrete, asphalt or other porous materials.

• Double segment
• 150 grit

" border="0"> ]]>" border="0">