Simpson Strong-Tie ET-HP22-N Two-Component, Epoxy Adhesive, 22-Fluid Ounce Dual Cartridge

Simpson Strong-Tie ET-HP is a two-component, high-solids, epoxy-based system for use as a high-strength, non-shrink anchor-grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Formulated for anchoring threaded rod and rebar into concrete (cracked/uncracked) and masonry. Ideal for use with threaded rod to anchor hardware. Easy hole-cleaning; no power-brushing required. Suitable for use in dry or water-saturated concrete. When properly mixed, adhesive will be a uniform gray color. Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry.

• Sold in 22-fluid ounce tubes
• Mixing nozzle and dual-cartridge dispensing gun sold separately
• Ohio DOT approved
• Cure times: 24 hours at 70F, 72 hours at 50F
• Meets ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-241

Note: This item is available for shipping but is regulated as a hazardous material, ONLY ground shipping is available. Please make sure to review the Safety Data Sheet for this Product. Please contact us at [email protected] or 419-794-8238 or 800-669-3309 with questions.